I need a wrist pin bushing for 1 1/16 inch pin. Please contact me at my e-mail address Thanks
Crew or Bench Car. Doesn't have to be motorized. We use it behind a Speeder car as part of an interpretative ride.
Please email:
New purchase ----will sell MT-14 and 19's first---Ex-CNR----nice shape---$1500.00US each---Ph:780-499-4307----Bob Cantin
Restoration project - late 1920s Fairmont 3000# capacity MoW manually operated crane car. Photos of original equipment and other information or data that would be helpful in putting this equipment back in working order will be appreciated.
Mailing address:
Pat O'Shields
15 Circle Dr.
Mauldin, SC 29662
E-mail -
TNX - PRO
Pat O'Shields
Facilities Development
ph 864-454-5562
fax 864-454-5858
digital pgr 864-290-9983
Dual gauge MT-14-L. Restored motorcar with seats, Onan rebuilt engine, custom manifold and exhaust, all new electrical parts (coil, etc.) rebuilt starter, new clutch, transmission rebuilt, two sets of axles, all new brake parts, and new gas tank. The car has been tested on four narrow gauge runs. It takes four hours to change to standard gauge. The engine has approximately 70 hours on it. NARCOA and MOW ready. Car is located in Los Angeles. See the photos at: http://home.netcom.com/~wparsons/Narrow.html $8500 with all dual gauge parts including second axle set, $8000 as narrow gauge car (no second axle set), $7000 as standard gauge car (narrow axle and support brackets removed). Contact Wayne Parsons 818-368-5942.
I have 2 Woodings Motor Cars for sale - One CBI & One CBL
1300.00 us for both
Email me for more detials at
GM&O - IC Motor Car Owners,
Some friends and I are in the process of preparing an all-time
motor car roster comprising the fleet of the (GM&O) Gulf Mobile
& Ohio, (ICRR) Illinois Central and the (ICGRR) Illinois Central
Gulf.
It seems that the records for these cars have gone by the wayside.
So, we are collecting all of the information available and putting
it into a data base. This data base gives the engine serial number,
car serial number, engine type, date built, Railroad and car number,
any renumbering data available and special features for each car.
We are also going to the extent to note where engines have been
swapped from car to car and etc. So far, we have gained data on
156 cars for the maintained railroads. We are also looking for
any assignment records for the motor cars as far as sections assigned.
I am asking anyone who owns a car from the railroads mentioned
or has information available to contact me. I will send you a
sheet with the information needed for the file and if you would
please fill it out and send it back to me. If you have a copy
of the history card for your car to go by it would be very helpful.
Anyone with a photo of their car, please feel free to e-mail a
copy of it as well.
If enough information presents itself, there is the possibility
to produce a roster sheet to anyone interested.
If you or anyone you know has any information to add to the roster,
I would really like to hear from you. Upon request, I will send
you a preliminary roster for you to view and see what information
I am looking for.
Thanks for any information you could provide.
Darren Doss
1575 E. County Home Rd.
Union City, TN 38261
901-885-5693
800-358-8410
Cheap trackcar suitable for conversion to steam. Engine can be non-operating or missing. Prefer car near eastern Pennsylvania.
Contact:
Donald Fenstermacher
15 Grove Circle
Sellersville, PA 18960
Hard copy pictures available upon request for serious buyers only.
Contact:
Mike Craner
668 Ridgeway Drive
Taylor Mill, KY 41015
859-491-6372 home
859-331-3343 work
Ex-CNR A-3, 4 cylinder Waukesha power, 4-speed transmission,
water cooled. I also have the Fairmont aluminum windshield for
this unit----$1,000.00US. Just received some more MT-14 and 19
cab and chassis only, plus a nice complete MT-19 which owner
took all apart ---$1,000.00. Still have a few push cars left. Ph.780-499-4307
Want to buy a NARROW GAUGE Motor Car to be run on a small steam Museum type setting in Indiana. Would like to get a car that has sound running gear but, may need paint and seats and cosmetic touchup. Please contact by "E" Mail
1 genuine used Onan CCKB engine complete - less clutch adapter. Had NEW carb and starter rebuilt 3 yrs ago. Still roadworthy, but could use overhaul in the foreseeable future. Located in central Pa. 717-567-6429
Bob Craven
central Pa
Mr Jim Bragg wants to sell the A&R motorcar, slide base engine with A&R's body for the price he paid, $1800. Also some MT-19's, Price $2000 to $2500.Carey Boney Wallace, NC
Wanted to buy: Fairmont MT-19 transmission in good shape. Contact me via email: Rick Tufts:
Thank you
Howdy,I'm in need of the following parts to complete a couple of restorations:
Please state condition and price.
Thanks in Advance,
-Ken
M-19 carbody and cab. Car is former Chicago Great Western M-19AA.
I am selling frame, axles, fenders and cab. You can convert your
fiberglass car to a Fairmont aluminum cab. Located in Ohio.
Jeff Levengood
CGW M19AA
For FM40B-Intake manifold, 2 cylinder heads. Would buy complete engine. Marv. Weber 831-425-5467 California
Fairmont A4-E, Canadian National #187-99 with Ford 4-cylinder industrial engine. It's reaching completion of its restoration which included making it truly double-ended and easily able to be operated in either direction. Located in Salem, Oregon. See http://ironradio.com/a4 for more information. $2250.00/OBO.
The photo for the ad - http://ironradio.com/a4s.jpg
I am currently looking for information and location(s)for any AT&SF Cars that might be for sale. I am currently looking for pricing, pictures, and level of restoration for any cars that might be out there.
Please contact me at the following email address:
Thanks,
Jim "Ole Mush" Harlow
Edmond, OK
I'm looking for two used END ARMS +ACM- M30124 for a mt19
Ken Caflisch
-------- Original Message --------
Subject: [speeders] Fairmont Parts on EBAY
Date: Mon, 12 Nov 2001 19:57:52 -0700
From: Bill Taylor
To: speeders@lists.cirr.com
I bought some Fairmont parts that I need to move along. Put them on EBAY. Here's the list:
Any questions, give me an email. All good stuff.
Bill Taylor
Complete cab or cab front for Fairmont S-2F.
Thank You!
Ed Holler
HollerTime@juno.com
1940 industrial green diamond motor Redmond's Towing Service, Inc. Pasadena Md. 410-437-1111 email to
1 CR7 complete railway condition . Included will be a rebuilt carb and a buzz box and new timer points . I have had this car running . Will need some wiring . Will include 4 new ice wheels that can be turned down . 750.00 US
Cab is a fibre glass cab like the CR7 that is for sale on the narco site . All glass is good.
Also A4 D this car has steel and wood enclosed cab with heater. Has new carb and fuel lines , new rad ,plugs points and cap. Wheels are good and comes with portable turntable . 1200.00 US
Both cars are located in British Columbia
Sheridan
Fairmont MT-14-L - This car is NARCOA ready motorcar. Car is proven performer that has been on two BC Rail runs and many West Coast runs.
Equipment includes:
Note: Fairmont tow hook on front of car in picture not included in sale.
Car is located in Walnut Creek, CA. Delivery with 200 mile radius at no charge. Asking price is $5,500.00
Fairmont CR7 motor car ex-CP. Excellent ROC engine, refurbished and repainted in 1998. Les King seats, replacement vinyl/canvas doors with vision panels, revolving beacon, new headlights, horns. NARCOA ready. New battery. Rebuilt carb.
This car was my first and I have many miles on. Reason for selling I am moving and dont have room for it. You have my pride and joy for $1500.00. Located in Providence, RI.
Warren Riccitelli
Providence, RI
(401) 231-5640
Subject: For Sale
Date: Mon, 25 Jun 2001 11:10:52 EDT
From:
Grand Trunk Western S-2. Excellent running order. Excellent condition. Has a nice front and roof that was restored to Grand Trunk specs. Seats that are on the car can be removed for originality. $3,500 firm. Please email call 606-325-8035 and ask for Don Maxwell.
Thank you
Just received truckload of A-4's, parts, trailers, trailers with service boxes. Some A-4's missing engine parts (starters, alternators etc.) otherwise units are basically all there. Great project cars---e-mail for prices and pics ---
We are clearing out a large group of used motor car parts in a single lot.
Please view pictures and descriptions here, http://www.labelcollector.com/car/ and if you have any questions, contact me.
This one lot deal includes all of the following;
front cab and side-panels
ST2(?) frame/body
body parts
alternators, flange brakes, etc.
wipers, yokes, seat mounting brackets, etc.
2 control panels, muffler, seat parts, vent covers, pillow
block bearings, etc.
side steps, axles, etc.
gas tanks, engine mounting bracket, chain idler wheel, etc.
MT19 frame
Paul Jarmusz
:~:~:~:~:~:~:~:~:~:~:~:~:~:
Salem, Oregon
503-371-0868
Looking for an M9 to restore.......
Jim Canavan
Glens Falls, NY
Hello All-
I am seeking the following items for my Fairmont S-2;
1 - M24837A - Holder, starting crank, plain
1 - M35511A - Holder, starting crank, with loop
1 - A595 Timer Blade w/ point
1 - PB-17G Adjusting Screw w/ point
1 - M33435 - Idler Strap - pull rod to spring
1 - an original copy of Fairmont Bulletin 417, Service Instructions and
Parts List for the S-2F series.
Any help would be greatly appreciated!
Thanks-
Edward J. Holler
201-858-2603
WatchMeister Co.
http://www.watchmeister.com
To complement Sheridan Marshalls Woodings parts for sale, I have a few sets of NOS Woodings brake liners and shoes. These are unused. They have surface rust on liners. Will also fit Sylvester cars. $60 + postage for a set of four liners and 4 wooden shoes.
Eric Schwandt
If interested please contact me.
Thanks
Sheridan
I have a Fairmont Railway Motors A4 Series D gang car for sale. The engine and transmission seem to be in good shape. The car needs work, but could be a good car with some work. It was built in 1973 for the Mississippian Railway in Amory, MS. If you are interested in-more information on the car, please call/email. I will be glad to send you some photos upon request. I have the history card for the car and will be glad to fill you in on all the information I can. I also have for sale, a spare NOS Fairmont rear end and axle for the A4 style cars.
Thanks,
Darren Doss
Union City, TN
901-885-5693
I am looking for any information such as technical data, years of production, estimated values of parts as well as restorable cars, and cars of this model still known to exist for the Northwestern, Casey Jones model 561-B.
You can email me at
Any help would be greatly appreciated.
Thank You in advance,
Bruce Pierce
Subject: M-19 for sale
Date: Mon, 11 Jun 2001 09:54:25 -0400
From: Rick and Linda Tufts
Ex SAL open M-19 for sale. Car has been repainted, new drive belt, carb reworked, 12-volt charging system & alternator installed, 4.5 gallon gas tank which has been sealed and/or lined, new gas line, 12 volt auto coil setup. Car runs excellent. Aluminum side skirts, aluminum lift handles, which have been elevated. No lights or seats. Pretty much rebuilt as condition it was received. $1,700.00
Rick Tufts, 95 Idlewild Road, Pinehurst NC 28374
(910) 295-0987
Greetings, I am searching for a NARCOA excursion ready Woodings motorcar preferably equiped with an electric turntable and located in the mid-east and eastern areas of the USA.
Thank you,
Steve Weiss
397 Spring Valley Road
Paramus, NJ 07652
(201)-262-3455
How can I find out what a restored A6 is worth?
S2-E 95% complete but dissasembeled for restoration. Needs drive and generator belts,and 6volt coil. Located in Iowa 500.00
I have two railcars for sale:
1 Kalamazoo model 27W built for the US ARMY. Rebuilt with a Chevy 305 with a 5ton truck transmission. Great for moving heavy loads but will run just as fast as the rest of the crowd and then some.Canvas top. NARCOA ready $1800 with 2 cast wheels or $1500 with all pressed wheels.
1 Fairbanks Morse Sheffield model 40B. It is fully restored to C&O specs and NARCOA ready. New glass, professionally rebuilt magneto, new wheels and brake actuated brake light. Papers, manual and many other extras included. I ran it on many Mid-Atlantic runs in the Summer of 2000 with and without the cab. I am asking $5000
For inquiries please call 717-927-8268 or e-mail me at Ask for Chip
I have a Parts catalog and operations catalog for a Tamper Motorcar Model TMC-6. This car is about18 years old. It is powered by a 16 hp. Briggs engine. Both these manuals are new. The parts catalog is $60.00 and the operations catalog is $20. If interested, send an E-mail.
Thanks
Tom
Fairmont Motor Car MT14 Series L, with Onan Engine. Excellent shape and ready to run. Originally sold to Missouri Pacific 5-17-84. Available for view at the Antlers Hotel, Kingsland, Tx. (theantlers.com). Price $3250. Pictures available at the link below. Contact Dennis Thomas 512-478-8557 (weekdays) 800-383-0007(weekends) or
http://www.theantlers.com/motorcar/
I need a head RO-C gasket for M-9. Please contact me at 606-325--8035 or by e-mail
1 M19 front push bar . 15.00 plus shipping by regular mail
Sheridan
Aluminum Lift bar for an MT-19A in reasonably good shape.
Thanks
Chuck Smithers, 916 444-9993
Ex-CNR Fairmont MT-14 with fibreglass cab--$1200.00US. Contact for freight rates to your destination.
Hello all, I have for sale the following -
1 A4 EX BCRAIL Car has new rad,new carb,new fuel lines. has good wheels and has a heater. Comes with portable turntable. Running
2 CN A4s both need restoring but I did have one of them running.
1 CR7 running with rebuilt carb . Fiber glass cab have 5/16 wheels for it. car is complete . would need very little work to take it on a run.
1 Woodings rearend.
1 Woodings transmission with clutch.
1 16 H/P Tecumseh engine . Has new rings , gaskets and has starter.Have all the clutch pieces for it.
Would like to sell as a lot for 4250.00 US. If interested please contact me
Thanks
Sheridan
UP MT-14 AND TRAILER the car is a Fairmont MT-14-l-3--done up in UP colors--has a elecrtic mechanical lift--turn table--Green 20 HP CCKB ONAN engine-runs real quite and strong--new brake pads--auto brake lights--all froward and rear running lights--strobe light on top--seat four people--9 window version metal cab car--hitch front and rear w/tow bar--also 6' x 10' trailer with torstion axle and 15" tires and spare -- channels in floor and a winch with steel cable for loading (car is very low so easy to load & unload)--electric brakes-- $6000.00 includes all--
Ron Hoopman
319-396-9187
Cedar Rapids IA
Due to other responsibilities this year, I have decided to pair down to one car, a MT14.
I have listed on Ebay this second car. Everything has been restored, excursion ready. However, it will need a bearing available from Dan Brown:
A1399
44671
This has started to play, just a hair. Shut down car for crankshaft protection. Wasn't present in restoration test runs.
That's the bad news. Good news is that everything has been restored, and will come with two Fairmont NOS (NEW) belts. The last 2 of three that Fairmont had in stock at the time. All new wood, Fairmont Safety Plates.
Belt is new, so it squeals. Adjustment in Idler tension will fix that.
I have had fun with this.
Pics of unit at: Nofocus1.homestead.com/ebaysalespics.html bottom of page, after the models.
Regards-
Bob Schoneman
I am in need of 2 ez-472 carb valves for my c-8 carb. I am also looking for an extra buzz box f7996 for my s-2. thanks.
1956 fairmont m19 F ROC engine car is ready to go,i also have a spare rebuilt engine for this car car is located in central N.J. $3000 FOR CAR, 1100 FOR REBUILT ENGINE OR 4000 FOR BOTH CONTACT AT 732 920 2072 OR EMAIL AT
Hello: I have just been going through your web-site, and wondered if you could be of assistance to me....I am looking for the metal parts for a pumping handcar..I already have the wheels, but I need everything else...do you know where I may be able to locate someone who deals with handcars...I would prefer a Canadian listing....
Thank you in advance for your assistance,
David Morrison
Chairman
Handcar Restoration Committee
Saskatchewan Historical Railroad Museum
I am posting this for a friend of mine. He has a Kalamazoo Model 23B gang car for sale. It has either a two cylinder Waukesha or Wisconsin engine in it. The motor has been completely rebuilt. It has the friction flywheel drive similar to a FM40B. The car is an ex GTW car having come from the GTW Shops at Battlecreek Michigan. It came with a home made cab, but he took it off because it was ugly. He cleaned the car up from the chassis up and repainted it. I have seen this car personaly and it looks nice. Because he's a postal worker, his schedule didn't permit him to run the car. He wishes to get rid of it. Contact Ken Kadrovich at 231-798-2331 or E-mail at
Please do not call me on this because I do not know what he wants for it. He says "Make an offer." The car is in Muskegon Michigan.
Dave Stroebe
Sorry, no photos available.
Email Dave Verzi at for contact information
(2) cast steel 20" wheels for the big Fairmont "A" cars. Brand new, still in the factory paint. Located in central Pa. $400/pr. or 717-567-6429.
Bob & Merle Craven, central Pa
Motor car friends,
I want to thank everyone who has contacted me about the Illinois Central inspection
cars and Section car I have for sale.
So far, all of the M9 Series G cars have been sold. The only car left at present
time is the S2 Series H section Car. I have listed the specifics on the car
below. Photos are available upon request and any questions will be answered
promptly.
Thanks for all of the inquires on my cars, I have noted many names who are looking
for cars and will notify you when some become available. There is a good chance
that three M9 Series G cars will be available in the future along with an A4.
However, when these cars become available, I will post them.
Thanks,
Darren Doss
Illinois Central F8026
Fairmont S2 Series H-1-5 Section Car
Engine type: RQ-C
Engine Serial Number: 76358
Built date: 7-31-46
This is a neat old section car, what can I say about this one. The carbody is
in very good shape. It features the Fairmont add-on windshield which contains
good window glass. The windshield and roof are straight and very sound. The
car is painted Fairmont orange and is stenciled F8026. The car tags are all
still in place on the seat top. The aluminum side panels, wooden seat top and
side steps are all in very good condition. The wheels look to be good and have
many miles of service left. The drive belt is in good shape and also has plenty
of life. The engine which is not original to the car was built in 1946. However,
it is free, has good compression, features the condenser/hopper style water
jacket and had the Hy-duty timer. With just a minimal amount of work this car
would be ready for the rails. It comes with a history card, starting crank handle
and the generator and light outfits. The car presently has wooden lift handles,
but aluminum handles are available if desired. The price for this car is 1400.
Fairmont HY-Rail frount and rear as is, set up for sale. $700.00 obo.
E-Mail: JTrem98741@aol.com
John Trembly
615 Menaul Blvd N.W. #7
Albuquerque, NM 87107
505-761-6628
Fairmont MT-14--done up in SANTA FE --Beautiful car--clean runs fine--has an after market Hydralic turn table--20 hp ONAN cckb engine--all lights including auto brake lights with trailer with electric brakes and loading ramps--new Fairmont wheels one year old less than 300 miles on wheels--sell as pkg only--firm $7000.00--car is located in Cedar Rapids Iowa--contact Ron Hoopman 319-396-9187 or e-mail
Wanted:
Old Speeder needing restoration. Looking for something in the 1930's that needs
a wooden cab, or an open car.
Gary W. Dion
Visit our website www.mich.com/~gwd
G. W. Dion Company LLC
1910 Lakeville Road
Leonard, MI, 48367, USA
Phone 248-969-3022
Fax 248-969-0370
I have a Fairmont two-cell hand lantern #M4804 that is in great shape except it is missing its mirrored reflecter behind the bulb. This is part #F403 in the Fairmont catalog. Does anyone have one of these, know where there is one, or know if there is a Dietz (or something) subsitute part? I have a friend who might want the lantern, except he's worried we can never find the missing reflector.
Bill Taylor
Does anyone have the schematic and parts numbers for the Harley Davision twin coil and the 12volt "ice cube" relay that some folks have used to replace the f12269 vibrator twin spark coil?? I saw one in use this weekend on a m19 but never got the part numbers.
Bill Young in WV
I am looking to purchase a second hand 8 wheeler truck with long wheel base, twin steer, bogie drive, available in NSW, AUSTRALIA only. Any information would be greatly appreciated.
Kind regards
Steve Moffatt
Purchasing Manager
Manildra Group
I have a pair of ICOM IC-M5 VHF Marine radio transceivers for sale. They are basic units, without antennas or battery chargers. They are keypad programmable for the 140-170 Mhz frequencies used by most railroads. ICOM dealers still support these radios with a large line of spare parts, accesories and batteries. Selling "AS-IS" for $ 100.00 for the pair. I will handle the postage. Contact Southeastern Rail Service @ 757-285-4973 or e-mail to
AN original fairmont UP MT-14-9 window version -
as a pkg $6500.00--Ron Hoopman--Cedar Rapids IA--319-396-9187
Voltage regulators for Onan CCK, CCKA & CCKB. Part number 8RH2004G I have twelve available. Prestolite who bought the Motorola line closed out the inventory. Cost $28.75 US shipped UPS in continental US. contact me for more details.
Mike Skrocke
(248) 474-2827
Eight-man Beaver Car. Model BC8M85. Four door, aluminum cab with great visibility. Powered by a 45 hp Lister-Petter diesel engine. Full Sundstrand hydro-static drive. Will to carry four adults with over-night bags in comfort. Complete with hydraulic turntable and four-wheel drive. Full radio inter-com system. These cars were made in the mid to late eighties and only 18 of the eight-man model were ever built. Priced at $15,000. FOB Calif.
Tom Phair
call (530) 713-9582 or
Subject: Speeder Storage Space in NJ
Date: Sat, 24 Mar 2001 20:16:26 -0500
I am in need of a speeder friendly storage space in Northern/Central NJ. I am trying to rent a garage in my town (Bayonne, NJ), but have been unsuccessful so far. Does anyone have a garage or other secure indoor storage area I can rent for my speeder until I find a suitable garage in my town? I need to find something no later than 5/15.
Thanks!
Ed Holler
201-858-2603
Looking to buy an MT19 in good condition. East coast preferred, but willing
to travel.
Pete Wenk
Beaufort, NC
252 728-4666
S2-H NARCOA ready -- $2,500 or trade for 2 passenger trailer cars with brakes in good condition or an A-4 car in good condition. Call Don Bell: 423/842-0330.
M19-A Cottonbelt Route Near mint - 95% restored needs rear window glass and side curtains. Runs great, track ready. We just don't have time to use as we both work full time. $3000.00 Call or email 714/490-6000 9am - 4pm M-F PST
Subject: Fairmont items for sale
Date: Sat, 17 Mar 2001 17:02:21 -0600
Fairmont Enthusiast,
A friend of mine and former Fairmont employee has contacted me to help him sell
some of his collection.
Bill Billett of Fairmont, MN is the gentleman's name and he was involved in
Hy-Rail development at the plant. He has collected some items and is interested
in selling some of the parts. In our conversation he stated that he has the
actual cut-away assemblies that are illustrated in the Fairmont catalogues and
sales bulletins.
The cut-away he has for sale is as follows:
He also has some different Hy-rail studies and research finds as well. There
is also a windbreaker jacket with Fairmont Railway Motors "Safety Award"
that is for sale.
If any of these items interest you, please call him at him home phone number.
This number is as follows: 507-238-1130.
Bill's address and e-mail address is as follows:
William J. "Bill" Billett
120 Belle Vue Heights
Fairmont, MN 56031
507-238-1130
Bill Billett
E-mail Address(es):
Thanks to anyone who contacts Bill.
Darren Doss
C-5 carb.Check valves (poppet valve). Cost $15.60 each plus $3.00 S/H. Have some parts for the C-5 and C-8.
Carey Boney
1605 Powers Road
Wallace, NC 28466
910-285-7489
GANG CARS
Fairmont A4Z36
Narrow Gauge Gang Car
Car was converted from standard gauge
Car#249296 - 1980 Model
Ford 2.3L 48 h.p. gas engine
4-speed transmission
Reversing differential
Double ended cab - Curtains
Wt#3000
$15,000.00
F.O.B. Phx. Az.
Fairmont A4 Standard Gauge
#606 - "Custom Cab"
Formerly NICTD Car
(Northern Indiana Commuter Trans. Dist.)
Four cyl. Gas engine - unknown mfg.
"Suburban Bench Seat"
20 gallon + gas tank w/h.d. shield
Lights, wipers, beacon, heater
Runs great!
$4,500.00
F.O.B. Phx. Az.
Fairmont A4-E Standard Gauge Gang Car
Former Denver Rio Grande
Enclosed cab (Damaged)
1985 Model (Approx.) Four wheel drive
Factory Hydraulic turntable
Ford 4 cyl. 2.3L 48 h.p. gas engine
Car runs! Just needs some "personal attention!"
$4,500.00
F.O.B. Phx. Az.
Fairmont A4-D Standard Gauge Gang Car
Ford 2.3L 48 h.p. gas engine
Four wheel drive 4-speed transmission
Reversing differential
Double ended cab
Fair condition
$1,800.00
F.O.B. Phx. Az.
Dudley Newman
(602) 952-0035
Pictures available upon request!
HUNTER HEATER, FAIRMONT. $225.00 Ed Morse PH 831-636-3500 (no calls after 7:30 pm please) or email railcars@slip.net. Located in Hollister, CA.
MT19A3-2 FAIRMONT (1984). SOLD
Former SP, fully restored. Professional paint, large side mirrors, custom made
visor, lots of chrome, must see to appreciate. Track ready, runs great. Not
aware of any problems. Selling due to downsizing of collection. $4,200. Ed Morse
PH 831-636-3500 (no calls after 7:30 pm please) or email Located in Hollister,
CA.
FAIRMONT MT-19-A 1976. Ex SOUTHERN RR. Open car with round corner alum. top. Car needs complete restoration. Mostly complete less: Lift handles and Side Curtains. Top is damaged on left side, but repairable. Engine turns, Twin seats. Engine hood included. Car located in the Louisville KY metro area. 1200$ Richard Clark 812-944-1643 Email
M9 - restored or restorable.
Thank you,
John Black
I have four Motorola HT600 portable radios fhat are perfect for motorcars. They came from CSX and have CSX engraving on them. They are programmable and can handle 6 channels. One for Narcoa and 5 for your favorite railroads. I will include a new battery and program them. I do not have any chargers. They are on Ebay for about $25.00 regularly.
To see one goto: http://houston.railfan.net/ebay/ht600vhf.gif
They are in great shape. $125.00 Shipped
Thanks,
Andrew D. Hudanish
KC0EJX
ATSF A3D
MP M9G
Houston, TX
I have the following transmission, clutch assembly and clutch actuator rod for sale. The transmission appears to be in good usable shape. The clutch and clutch assembly appear to be recent take off parts, but are in very good condition. Below are photos of all three items.
The entire lot is $570.00 FOB Memphis Tn. The items can be shipped UPS or Common carrier of your request. The buyer will pay actual Freight charges. Check or money orders accepted. ( Personal checks require 10 days to clear before shipment) If you have any questions, please contact me at
Thank You
Bruce Pierce
A Fairbanks Morse Motorcar, 40-B. The car is complete, and has a spare engine, that is complete, and turns freely. Call 1-731-644-1928.
Paul Copeland.
Paris, TN
Dear MotorCar Enthusiast,
My name is Paul Jarmusz, and I am a NARCOA/PRO/MOW member. You may be interested
in the Fairmont Motor Car Parts I listed on eBay this week. You can view them
here -
http://cgi6.ebay.com/aw-cgi/eBayISAPI.dll?ViewListedItems&userid=labels&rows=25
If you have any question, give me a call at 503-371-0868. Thanks for looking!
Paul and Mika Jarmusz
:~:~:~:~:~:~:~:~:~:~:~:~:~:
Salem, Oregon
I can get new Woodings springs made from original blue prints for $35.00 a piece. I have them made a little heaver so they will hold the weight of the car better then the original springs did. I have these springs in my car for 1 year and they are holding up great. If interested call or e-mail me at 717-792-9181 or
Thank you,
Mike Travis
Thanks to all who have purchased items from me. Here are a few other items offered for sale -
All items are FOB Memphis, Tn. Photos available upon request. Please contact me via email at ( I will be away from my PC until 2-26-01. I will answer emails as promptly as possible.
Thank You
Bruce Pierce
1943 FAIRMONT M19
This car was purchased by me 18 years ago from the C&O. It was restored
then with new glass, paint and carb kit. It comes with a custom canvas cover,
new-never used Pontiac coil. Has original tow hitch. I have had it stored inside
since owning it, Looks good, last run 10 years ago. This unit spent its life
running from the Ludington car ferries on the west to the village of Baldwin
to the east. Write S.D. at 909 N James, Ludington,Mi 49431 or E mail at $2800.00
OBO
I have 3 motorcars for sale -
1948 M19D ex Seaboard Airline open car
OD-B engine
$1,750.00
1965 M19AA ex CB&Q new wheels
2 cylinder 2 stroke
$3,000.00
1988 MT14 ex Union Pacific SOLD
Full aluminum cab with electric heater
B48G 22hp Onan engine
$3,750.00
If interested call or e-mail me at
717-792-9181 or
ST2-K ex-Canadian car with fiberglass cab (no doors). Equipped with ex-military buzz coil that puts the stock Fairmont coil to shame with a hotter spark and no spark plug fouling! This car has the 2-speed rear axle which makes it an absolute "stump puller" in low gear. And, in high gear going only 20 mph, due to a slow A-car directly ahead, this RQ-D powered ST2 pulled a heavy trailer car up Camas Prairie's famous 14-mile long, 3% grade without missing a beat. And if this display of raw power alone isn't impressive, the fact that this pussycat engine can always be started without the crank will simply amaze you! This ready-to-run car has good wheels and brakes, and it is equipped with alternately flashing brake lights (four in all). And it can be yours, picked up by you in Oshkosh, WI for only $1,800.00 firm.
Contact Mike Paul at
I have four compete Fairmont M-19 Bearings with housing for Sale. Older style with oilers, plus with Bracket Tubes (steel tubes with aluminum flat piece.) $50.00 (for 4) plus actual shipping cost.
Cheers
As posted earlier, I have the following Fairmont parts for sale: 69744K Flange Brake kit (1) available PRICE REDUCED $85.00 * price reduction due to some minor deterioration due to storage* please contact me for details
Please contact me at with questions.
Thank you
Bruce Pierce
One M-9 steel cab complete. No window glass. No dents. Available where is as is. $100.00. Contact or call Don at 606-325-8035 evenings. Located in southern Ohio.
Reply to:
Phillip Kennedy
or Dan Trent
See attached photo for lift pipe saddle and brake hook.
I have 3 flange brake kits for sale. These are part number 69744K. The kits include all of the hardware and fasteners for flange brake application. I will also include the pivot arm which connects both brake arms with each other. The kits and rods are $ 135.00/ea FOB Memphis TN.
Other Fairmont parts available.
For inquires, please contact me at:
Bruce Pierce
766 McDougal Dr.
Murray, Ky 42071
Videos of Trackcar Meets
Digitally recorded and edited -
Videos recorded from 8 mm -
Coming soon: 1,000 mile Loop trip in Ontario. Sault St Marie, Wawa, Sudbury.,
British Columbia adventure 2000 with Hank Brown, New Jersey, New hampshire and
Maine (2000) with Nerca.
Waybill: All tapes 2 hours unless specified, VHS, with narration and music where appropriate at: $16.00 each plus $3.00 shipping 1st tape, $4.00 shipping 2 tapes. Free shipping with order of 3 tapes or more. Pay with Visa, MasterCard, checks, dog bisquits or trackcar parts!
Bill "Mad Dog" Kozel
23 Lee Ave.
Rexford, N.Y. 12148-1209
518-399-5836 anytime
14' Heavy Duty Utility Flatbed Trailer by Fayette Group. 7000 lb. GVW, DOT lights, Tandem axle with electric brakes on 1 axle, "rails" welded onto fold down (hinged) rear gate. Also has hand crank winch. Rough oak flooring. Capable of hauling two (2) railcars. New in '97. Over $2000 invested. $1500. Free wind deflector included. Chuck White, 219-482-7930 or
Chuck White
Hoosier Ferroequinologist
3 chime Leslie Supertyfon S3L need a cleaning and some new paint but are in good shape and work fine. $350.00 plus $35.00 shipping in for delivery in 48 states.any questions will be answered at 732 920 2072 or email at
I am in need of two parts to complete my M-19, they are exhaust elbow #M33789 and exhaust outlet #M33790 any help in getting or finding someone that has these parts would be greatly appreciated.
Thomas Tutherow
608 Hwy 53 East
Burgaw, NC 28425
I am looking for a Motor car with a trailer. I am interested in a Woodings CBL mid 80's vintage but I would consider any make.
Contact: Joe Marsh at
Steve Smith
1205 Meadowview Dr.
Salem Va. 24153
Phone: 1(540) 387-1759
Cell: 1(540) 312-8151
P.S. Pictures available upon request via- mail or E-mail
I am looking for a set of Nathan 3 chimes and a friend is looking for a set
of 5 chimes. Would prefer Nathan.
contact
Paul Rujak
Northwestern 550 B&B 6 man Gang car. 36 H.P. 4 cylinder Waukesha engine. Runs good. 3 speed trans w/ reversing differential. Restoration started including conversion to 12 volt, and larger gas tank. Due to death of one of our restoration group members, must sell. Also have 2 - 1500# Trailer axels and spring rigging to build a trailer for the car included. Car weight just under 2000#. $1,500.00 or best.
Located in Santa Cruz County, California
Contact Jeff Badger
831-475-4233
SMALL MOTORCAR - Fairmont M-9 or Home-Built or ?? Any condition railcar under 700 pounds. Close to Washington state.
Bruce Nagata
PO Box 671
Seattle, WA 98111
I currently have a set of Mitchell Hy-rail gear for sale. The gear came off a truck I bought for a commuter rail transit authority. The gear is in good shape.
Please contact me. Thank you for your time.
Cybele Hill
760-434-7440